Easee Ready, Руководство по установке пользователя

Страница: 14 / 18

14
General maintenance
If the product is installed in public spaces and is
accessible to everyone, observe local and national
requirements (e.g. Norway NEK400 part 6.1) in addition to
the procedures below.
Cleaning
The product does not require cleaning to operate
properly. Nevertheless, if the product needs to be
cleaned for cosmetic reasons, this is possible.
— Use a damp cloth and an all-purpose household
cleaner. Avoid using strong chemicals that contain oil
or alcohol, as this will discolour the plastic.
— Do not use running water or high pressure water jets.
Insulation testing (authorised electrician only)
When carrying out periodic insulation testing
of a charging circuit, it is recommended that
you remove the Chargeberry from its backplate
before measuring between all phases joined
together towards earth. Testing the circuit
insulation with the Chargeberry installed in
the backplate may damage the electronics or
impact the reading negatively.
Maintenance Practical details
Warranty
The device is free from material defects and is in
accordance with laws and regulations for consumer
protection in the country where the product is
purchased. All correctly installed Easee hardware is
covered by our 3 years limited warranty. If your charger
needs to be repaired within this warranty period, please
contact your Easee supplier. Further information can be
found at easee.support .
Safety
The product shall be installed according to local
regulations for low voltage electrical installations.
When completely installed and fitted with a
Chargeberry
Standards : Hereby, Easee AS declares that this product,
Easee Ready, is in compliance with the Low Voltage
Directive 2014/35/EU and RoHS Directive 2011/65/EU.
The full text of the EU Declaration of Conformity is
available at the following internet address: easee.support .