Earthworks DrumMic DM20, Руководство пользователя

Страница: 9 / 14

7
Referring to Figure 6-B, notice that on the Delrin® cushioned rim-guide
there are two sets of grooves. One groove is in the “center” of the rim-
guide (1), while the other groove (2 & 3) is “off center” (or closer to
the edge of the rim-guide). These two sets of grooves provide you with
“three” mounting options: (A) using the “off center” rim-guide groove
will place it closest to the drum shell, (B) or rotating the “off center”
groove 180 degrees will place the rim-guide furthest away from the
drum shell, and (C) the “center” groove will allow placement between
the positions (A) and (B).
Various types of metal drum rims have the bottom flange of the rim
either closer or further from the drum shell. One of the three positions
(A, B or C previously mentioned) will allow the RimMount™ bracket to
be mounted parallel to the drum shell. Position the rim-guide so the
bottom edge “flange” of the drum rim fits comfortably into one of the
RM-1 rim-guide grooves. This will ensure that the cushioned rim-guide
remains securely in place as you tighten the thumbscrew to firmly se-
cure the RM-1 to the drum rim. The soft protective Polyolefin® coating
on the RimMount™ bracket will prevent the possibility of scratching the
drum shell finish.
Soft Polyolefin® Coated
Metal Bracket
Rubber
Holder
Delrin®
Cushioned Rim-guide
Hook Portion
of Bracket
Thumbscrew
Figure 6-A. Elements of the RM1 RimMount™
Figure 6-B Positioning the Cushioned Rim-guide
Centered
Groove
1
Offset Groove
Positioned
on Left
Offset Groove
Positioned
on Right
2 3