background image

8

Adjusting the Microphone Height

Once the RimMount™ is mounted securely on the drum rim with the 
DM20 microphone housed in the rubber holder, the microphone body 
can be moved either up or down in the rubber holder to provide the 
desired height. Then the gooseneck will provide a good amount of lat-
itude in positioning the microphone head from any microphone body 
height. Adjusting the height of the DM20 microphone body is indicated 
in Figure 7-A and 7-B.

Positioning the Microphone Head

Once the DM20 microphone height has been set, you can position 
the microphone head. It is suggested that the microphone head be po-
sitioned between 1.5 inches and 3 inches above the drumhead. The flex-
ible gooseneck will allow you to move the microphone head either up 
or down above the drumhead as well as in and out from the drum 
rim.  You can also change the angle of the microphone head as shown 
in Figure 8-A. Then, Figure 8-B shows how the microphone head can 
be aimed more toward the center of the drum head by changing the 
position of the gooseneck. Keep in mind that the microphone head 
should never be placed “parallel” to the drumhead, but should always 
be at “an angle” to the drumhead. This will prevent the microphone di-
aphragm being forced to its backplate which could cause an unwanted 
pop or thump in the live sound or recording system.  

Figure 7-A and 7-B  Adjusting the DM20 Microphone Height

A

B

Содержание DrumMic DM20















Отзывы: