Earthworks DrumMic DM20, Руководство пользователя

Страница: 8 / 14

6
Close Miking Toms and Snares with the
DM20 DrumMic™ Microphones
Inserting the DM20 Microphone into the RM1 RimMount
The RM1 is designed specifically for the DM20 allowing you to mount
the microphone on the side of a tom or snare. The RM1 can also be
used on the top or bottom of a tom or snare.
It is suggested that you insert the DM20 microphone into the RM1 Rim-
Mount™ prior to attaching the RimMount™ to the drum.
The suggested procedure to insert the DM20 microphone into the
RM1 RimMount is shown in Figure 5.
First,
place the mic head and the
gooseneck into the rubber holder from the bottom of the RimMount™
(2). Push on the body of the microphone from the bottom (XLR connec-
tor end) to move the microphone up inside the rubber holder (3 & 4).
The fit will be firm, so you will need to apply a little pressure to move
the microphone body up into the rubber holder.
Mounting the RM1 RimMount™ to the Drum
The RM1 RimMount™ is designed for metal drum rims, and will not
work on wooden drum rims. Attaching the RimMount to the drum rim
is quite easy. While reading this section, please refer to Figure 6-A,
which shows the various elements of the RimMount™. First, loosen the
thumbscrew so there is more than enough space for the Delrin® cush-
ioned rim-guide to clear the bottom of the drum rim. Then determine
where on the drum rim you want to place the microphone and then put
the top “hook portion” of the RimMount bracket over the desired place
on the drum rim.
Figure 5 Inserting the DM20 DrumMic™ into the RimMount™
1 2 3 4