EarthLinked PHXTI Series, Руководство по установке

Страница: 3 / 12

PHXTI-IM (05/13) Page 3
1. Pre-Installation
Upon receipt of the swimming pool heat exchanger, check the model number against the bill of
lading.
The Earthlinked Technologies model numbers are as follows:
Model Number Rating, BTU/HR
PHXTI-90 90,000
PHXTI-115 115,000
PHXTI-130 130,000
This heat exchanger is approved for use with swimming pool heat pump heating systems using
R-410A, R-407C or R-22 refrigerants.
This swimming pool heat exchanger is sold as a system component, and must be sized and
properly matched to other system components to provide the anticipated performance and safe
operation of the system.
2. Installation
The heat exchanger is designed to be used as a replacement component in an existing swimming
pool heat pump heating system, or as a component of a new swimming pool heat pump heating
system.
The overall dimensions of the heat exchanger are illustrated in Figure1. The heat exchanger must
be mounted on a level, hard surface and oriented in the direction shown in Figure 1 (vertically, with
connections on the top) to perform properly.