18
Clock Alarm
You can set the alarm by using the “Clock Alarm”
menu. To set this alarm, press the MENU key while
group “J” is showing, then highlight the “Clk Alm
Set” label. Press the right arrow key. The screen
shown below appears. Using the right and left
arrow keys, move the black box to the first num-
ber in the time that you want to set. Now press
the up or down arrow keys until the desired num-
ber shows. Continue until the time shown in the
display is correct, then press the ENT key. The
alarm is now set.
To turn the alarm on, press the MENU key, then
highlight the “CLK ALM” menu. Press the right ar-
row key. The alarm is now activated.
When the alarm goes off, a message flashes on
the screen. Press the EXIT key to turn the alarm
off.
Note: The Eagle Expedition must be on in order
for the alarms to work. In other words, if you set
the alarm to go off at 7:00 a.m., then the Eagle
Expedition will have to be on at 7:00 a.m., also.
Timers
The Eagle Expedition has two timers built in. One is a countdown timer
and the other is a count-up timer. The countdown timer counts down from
the time you put in to zero. The count-up timer starts at zero and counts
up to the time you entered.
To set either timer, first switch to a window group
with a timer. Next, press the MENU key, then high-
light the desired timer set menu. In this example,
we’re setting the countdown timer. Now press the
right arrow key. A screen similar to the one at right
appears.
Using the right and left arrow keys, move the black
box to the first number in the time that you want
to set. (The time is in hours, minutes, and sec-
onds) Now press the up or down arrow keys until
the desired number shows. Continue until the time
Содержание Expedition
Страница 1: ...INSTALLATION AND OPERATION INSTRUCTIONS Eagle Expedition TM TM PAGES ...
Страница 49: ...45 GROUP J GROUP K GROUP L GROUP M GROUP N GROUP O ...
Страница 59: ...55 NAV SCREENS NAV 1 NAV 2 PLOT SCREENS PLOT 1 PLOT 2 GRP D GRP E GRP F GRP G GRP O GRP L GRP M GRP N ...
Страница 60: ...56 ...