background image

 

Copyright © 2003-2010 Eagle Tree Systems, LLC 

 

 

Page 16 

eLogger Specifications 

 

Voltage Measurement: approx 5V to 80V 
Voltage Resolution: approx  0.02V 
Current Measurement: up to 100 Amps, (150 Amps with the MPRV4-LEADS-150) 
Current Resolution: approx  0.02 Amps (0.035 Amps with the MPRV4-LEADS-150) 
Current Draw:  approx 30 mA with no sensors 
Weight:  Unit with Integrated Connectors:  approx 0.8oz (22 grams), 100 amp unit with Wire Leads: 0.9 oz (25 grams) 
Temperature:  Dual inputs, 0 degrees F to 424 degrees F (three temperature inputs) 
RPM range: approx 100 RPM to 50,000+ RPM 
Units of Measure supported:  English and Metric 
Software Language Support: English, German, Chinese 
Measurements:  approx 2.25” x 1” x 0.5” (57mm x 28mm x 13mm) including sensor pins 
Length of Wires with Wire Lead Version:  approx 2.5” (65mm) 
Record Time:  Varies with sample rate, parameters being recorded, and “activeness” of the model.  Anywhere from around 45 
minutes to many hours is attainable depending on these settings.     

 
Limited Warranty 

Eagle Tree Systems, LLC, warrants the eLogger to be free from defects in materials and workmanship for a period of one (1) year 
from the date of original purchase.    This warranty is nontransferable.   If your unit requires warranty service during this period, we 
will replace or repair it at our option.   Shipping cost to us is your responsibility. 

To obtain warranty service, contact us by phone, fax or email to request an RMA number.   No returns will be accepted without this 
number.      

This limited warranty does not cover:  

 

The Software (including firmware).   See the Software license agreement for more information on Software restrictions. 

 

Problems that result from:  

o

 

External causes such as accident, abuse, misuse, or problems with electrical power  

o

 

Servicing not authorized by us  

o

 

Usage that is not in accordance with product instructions  

o

 

Failure to follow the product instructions  

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY 
FROM STATE TO STATE (OR JURISDICTION TO JURISDICTION). OUR RESPONSIBILITY FOR MALFUNCITONS AND 
DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY 
STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, 
ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THE LIMITED WARRANTY PERIOD AS DESCRIBED ABOVE. NO 
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE LIMITED WARRANTY PERIOD HAS 
EXPIRED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THIS 
LIMITATION MAY NOT APPLY TO YOU.  

WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN THIS LIMITED WARRANTY OR FOR 
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILTY FOR THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES, FOR PRODUCTS NOT BEING AVAILABLE FOR USE, OR FOR LOST 
DATA OR LOST SOFTWARE. OUR LIABILITY WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT 
THAT IS THE SUBJECT OF A CLAIM. THIS IS THE MAXIMUM AMOUNT FOR WHICH WE ARE RESPONSIBLE.  

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, 
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  

Product Warranty Registration 

 

Содержание eLogger V4


















Отзывы: