Eagle Eye Power Solutions, LLC | 1-877-805-3377 | www.eepowersolutions.com
FAN REPLACEMENT
The following are steps to take to replace a defective fan.
1. Remove the screws holding the fan panel to the load bank.
2. Remove the wires on the terminal strip coming from the load bank.
3. Drill out the rivets holding the fan (four on each side).
4. Lift up the fan and unplug the wires to the fan. Connect the plug to the new fan.
5. Rivet the new fan back to the fan panel and install the fan guard.
6. Install the wires back on the terminal strip and place the fan panel back on the load bank. Make sure
that the wires are on the proper terminals.
WHITE
G-RED
FAN 7,8,9,
10,11,12 -
FAN1,2
3,4,5,6 -
FAN 7,8,9,
10,11,12 +
FAN1,2
3,4,5,6 +
W-RED
FIGURE 4 - 1
WIRES TO LOAD
BANK
