Eagle Equipment MTP-11V3, Руководство по установке и эксплуатации

Страница: 27 / 43

EAGLE MTP-11V3 Product Manual
27
STEP 15
Installing the Hydraulic Fittings
1] Remove the red plastic plug from the pressure port. Install the hydraulic fitting into this port.
Wind the fitting in by hand until the O ring is up against the face of the pump. Hold the fitting in
this position with a wrench and tighten the jamb nut with a second wrench until the washer
compresses the O ring. Do not use Teflon tape.
STEP 16
Installing the Hoses
1] Connect the short (24”) hydraulic hose to the T fitting inside the main-side post and the pump.
Do not use Teflon tape.
2] All other hoses are already routed inside the posts.
(Fig. 13A)