EAE UD105, Руководство по эксплуатации продукта

Страница: 38 / 44

PRODUCT MANUAL UD105
EAE KNX UNIVERSAL DIMMER
UD105 R1
©
EAE Technology www.eaetechnology.com Page 38 / 44
5.4 Scenes
The scene function of the switch & dim actuator has an 8-bit scene object. You can define for each 64
scenes with parameter window. Scene can be specified like brightness value and transition time to
new brightness.
When the actuator receives a telegram that retrieves a scene address, device will set the channels
desired brightness level in desired transition time to new brightness.
A scene is activated when it receives its scene number at the scene object. The storing of the current
channel values is carried out using the scene object.
For example;
Scene recall save
Hex. Des. Hex. Des.
1 0x00 0 0x80 128
2 0x01 1 0x81 129
3 0x02 2 0x82 130
4 0x03 3 0x83 131
5 0x04 4 0x84 132
6 0x05 5 0x85 133
7 0x06 6 0x86 134
8 0x07 7 0x87 135
9 0x08 8 0x88 136
10 0x09 9 0x89 137
11 0x0A 10 0x8A 138
… … … … …
63 0x3E 62 0xE2 190
64 0x3F 63 0xE3 191
Scene configuration
Scene 1…64 *Not used
1….64
This parameter is used to following parameter belongs to which scene. “ Not used ” meaning following
parameters are not belong to any scene.
Scene 1…64
Dimming time to scene values (From 0% to 100%)
(hh:mm:ss.f) *00:00:00.0 … 01:49:13.5
This time is defined the transition time of dimming speed. This parameter defines the dimming time
between 0% to 100%. Scene dimming time calculating example shown below;