EAE UD105, Руководство по эксплуатации продукта

Страница: 12 / 44

PRODUCT MANUAL UD105
EAE KNX UNIVERSAL DIMMER
UD105 R1
©
EAE Technology www.eaetechnology.com Page 12 / 44
5.2 Master Channel Parameters
5.2.1 Master - Dimming Settings
Dimming Method *Trailing Edge Dimming
Leading Edge Dimming
Auto detect based on the load type
This parameter is used to select the dimming method based on light load.
▪
Set the parameter to “Trailing Edge Dimming”
This selection is compatible with Trailing Edge driving loads.
▪
Set the parameter to “Leading Edge Dimming”
This selection is compatible with Leading Edge driving loads.
▪
Set the parameter to “Auto detect based on the load type”
This selection is enables automatic load type detection. Loads will be driven depending on
load type.
Dimming Characteristic
*Linear
Logarithmic (LED)
Incandescent Lamps
Halogen Lamps
Custom Dimming Curve
This parameter is used to select dimming characteristic type.
▪
Set the parameter to “ Linear ”
This selection allows the dimming proportionally.
▪
Set the parameter to “ Logarithmic (LED) ”
This selection allows the dimming for LEDs. (small load)
▪
Set the parameter to “ Incandescent Lamps ”
This selection allows the dimming for Incandescent lamps.
▪
Set the parameter to “ Halogen Lamps ”
This selection allows the dimming for Halogen lamps.
▪
Set the parameter to “ Custom Dimming Curve ”
This selection allows the dimming for desired curve for any other specific light loads.
Maximum dimming percentage 0… *100
This parameter is used to select maximum dimming level.
Minimum dimming percentage *0 … 100