Product Manual SW108 and SW104
EAE KNX Switch Actuator
PM R2.0
©
EAE Technology
www.eaetechnology.com
Page 8 / 22
In operation value
*
send value ‘0’
send value ‘1’
Telegram data can be selected.
Operation send interval [min]
1…*
15
…255
Here the time interval which in operation communication object cyclically sends to KNX line.
Activate scene
yes
*no
If the parameter select ‘yes’, scene screen open on the main window. You can find scene information
under the scene function title.
Overwrite threshold value with download
*
yes
no
During storage of a threshold, the threshold values are stored permanently in the device. As an
alternative, the original values can be reloaded into the device during each programming run of the
ETS.
§
Set the parameter to “yes”
User threshold values store in the device. This means threshold communication object will be
overwrite threshold values but ETS download can’t write on it.
§
Set the parameter to “no”
Threshold values stored in the device with a storage function will be maintained. If no threshold
values have been stored, the threshold values last programmed in the ETS remain valid.
Overwrite scene values with download
*
yes
no
During storage of a scene, the scene values are stored permanently in the device. As an alternative,
the original values can be reloaded into the device during each programming run of the ETS.
§
Set the parameter to “yes”
Scenes values stored in the device. This means scene communication object will be overwrite
scene values but ETS download can’t write on it.
§
Set the parameter to “no”
Scene values stored in the device with a storage function will be maintained. If no scene values
have been stored, the scene values last programmed in the ETS remain valid.
Overwrite operating hour values with
download
*
yes
no
During storage of an operating hour, the operating hour values are stored permanently in the device.
As an alternative, the original values can be reloaded into the device during each programming run of
the ETS.