E2S BExCBL2-L2D-P Скачать руководство пользователя страница 9

Страница: 9 / 12

E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: [email protected] www.e2s.com

DC-006_Issue_K (BExCBG)- Page 1 of 2 QAF_252_Issue_5

EU Declaration of Conformity

Manufacturer:

European Safety Systems Ltd.

Impress House, Mansell Road, Acton

London, W3 7QH

United Kingdom

Authorised Representative:

E2S Warnsignaltechnik UG

Charlottenstrasse 45-51

72764 Reutlingen

Germany

Equipment Type:

BExCBG05-05D, BExCBG05-05D-P

BExCBGL2-L2D

BExCBGL2-05D

Directive 2014/34/EU: Equipment and Protective Systems for use in Potentially Explosive Atmospheres (ATEX)

Notified Body for EU type Examination (Module B):

Dekra Certification B.V.
Notified Body No.: 0344
Meander 1051, 6825 MJ Arnhem, The Netherlands

EU-type Examination Certificate (Module B):

KEMA 01ATEX2222X

Notified Body for Quality Assurance Notification / Conformity to EU-type
based on
quality assurance of the production process (Module D):

Sira Certification Service
Notified Body No.: 2813
CSA Group Netherlands B.V, Utrechtseweg 310, 6812 AR, Arnhem, Netherlands

Quality Assurance Notification (Module D):

SIRA 05 ATEX M342

Provisions fulfilled by the equipment:

II 2G Ex db IIB T6 to T4 Gb
II 2D Ex tb IIIC T65°C to T130°C Db
IP6X Dust Protection to EN60079-0 / EN60079-31

Standards applied:

EN 60079-0:2012 + A11:2013 / EN IEC 60079-0: 2018
EN 60079-1:2014
EN 60079-31:2014
IP6X Dust Protection to EN60079-0 / EN60079-31

Directive 2014/30/EU: Electromagnetic Compatibility Directive (EMC)

Standards applied:

EN 61000-6-1:2007
EN 61000-6-2:2005
EN 61000-6-3:2007 / A1:2011 / AC: 2012
EN 61000-6-4:2007 / A1: 2011

Directive 2011/65/EU: Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)

The product and all the components contained within it are in accordance with the restriction of the use of hazardous substan ces in electrical and electronic
equipment, including amendment by Directive 2015/863/EU.

Regulation (EC) 1907/2006: Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)

The product and all the components contained within it are free from substances of very high concern.

Other Standards and Regulations

EN 60529:1991 + A1:2000 + A2:2013. - Degrees of protection provided by enclosures (IP code)

–

enclosure rated IP66/67

Содержание BExCBL2-L2D-P













Результаты поиска

Содержание BExCBL2-L2D-P

Отзывы:

Похожие инструкции для BExCBL2-L2D-P

Бренды по названию

Популярные бренды

E2S BExCBL2-L2D-P, Инструкция по эксплуатации

Результаты поиска

Содержание BExCBL2-L2D-P

Отзывы:

Похожие инструкции для BExCBL2-L2D-P

Бренды по названию

Популярные бренды