E-Z-GO RXV FLEET FREEDOM, Руководство пользователя

Страница: 32 / 130

Page 12
OPERATION AND SERVICE INFORMATION
Owner’s Guide
Read all of manual to become familiar with this vehicle. Pay attention to all NOTICES, CAUTIONS, WARNINGS and DANGERS.
B
excess of 12 mph (19 kph).
DO NOT tow more than three vehicles at a
time.
DO NOT exceed 5 mph (8 kph) while tow-
ing multiple vehicles.
Place the direction selector in neutral and engage the
neutral lock to secure the direction selector in the neu-
tral position.
Do not tow a single vehicle at speeds in excess of 12
mph (19 kph). Do not tow more than three vehicles at a
time. Do not exceed 5 mph (8 kph) while towing multi-
ple vehicles. Towing the vehicle above the recom-
mended speed may result in severe injury and/or
damage to the vehicle and other property.
Tow bars are not intended for road use.
Never use ropes or chains to tow vehicle(s). Tow bars
are available from the E-Z-GO Service Parts Depart-
ment.
Tow bars are not intended for highway use. Before tow-
ing, place direction selector in neutral and engage the
neutral lock. Do not ride on the vehicle being towed.
Tow bars are designed to tow only one vehicle at a max-
imum speed of 12 mph (19 kph) and up to three vehicles
at a maximum speed of 5 mph (8 kph).
NEUTRAL LOCK
To prevent the driven clutch from turning the rear wheels
during service operations and to prevent wear to the belt
while being towed, a neutral lock is located on the direc-
tion selector.
To operate the neutral lock, turn the key switch to ‘OFF’,
place the direction selector in ‘R’ and remove the seat.
Pull out (1) and rotate (2) the neutral lock pin handle so
that the pointed portion of the handle is over the side of
the direction selector cam (Ref. Fig. 18). Move direction
selector lever towards the area between ‘F’ and ‘R’. Dur-
ing that motion, the pin will snap into the hole in the
direction selector mounting bracket, preventing any
movement of the lever. When in this position, the direc-
tion selector remains locked in the neutral position.
The direction selector is a spring-loaded mech-
anism. To prevent the possibility of fingers
becoming pinched in the direction selector
mechanism, hold the direction selector lever
when releasing the neutral lock pin handle.
To activate the direction selector, pull the neutral lock
pin handle out and rotate it until the pointed portion of
the handle fits into the hole (3) in the direction selector
cam.
.
Fig. 18 Neutral Lock
HAULING
To reduce the possibility of severe injury or
death while transporting the vehicle:
Secure the vehicle and contents.
Never ride on the vehicle being transported.
Always remove the windshield before trans-
porting.
Maximum speed with a sun top installed is
50 mph (80 kph).
If the vehicle is to be transported at highway speeds, the
sun top must be removed and the seat bottom secured.
When transporting the vehicle below highway speeds,
check for tightness of hardware and cracks in sun top at
mounting points. Always remove the windshield when
transporting. Always check that the vehicle and contents
are adequately secured before transporting. The rated
capacity of the trailer or truck must exceed the weight of
the vehicle (see GENERAL SPECIFICATIONS for vehi-
cle weight) and load plus 1000 lbs. (454 kg). Lock the
park brake and secure the vehicle using ratchet tie-
downs.
2
1
3