5
3.
Tap button A to save and to advance to the next alarm.
4.
Repeat steps 1-3 until all your alarms are set.
5.
Delete an Alarm: Once on the alarm you want to delete. Tap button B to
change the hour until --: -- is displayed.
6.
Exit the Alarm Setting Mode by tapping button A repeatedly until the
current time is show (occurs after Alarm 6).
7.
You will
be confirmed with “Alarm Setup Successfully
.
”
Alarms
–
Setting the Alarm Volume
3 alarm volumes: Silent (0), Medium Volume (1), Loud Volume (2).
1.
With the current time shown, tap button C to enter the settings menu.
2.
Tap button B to switch between the volume levels: 0, 1 and 2.
3.
Tap button A to save.
4.
You will
be confirmed with “
Pill Dispenser Settings Updated.
”
SETUP
–
STEP 2
Filling the Tray
1.
Remove the clear tray that is inside the dispenser. This makes filling the
tray easier. Important: Never force the tray to rotate.
2.
e-pill MedSmart Voice comes with 9 different dosage templates. Each
template is designed for a specific number of alarms and, very
importantly, the time of day you are filling the tray. Place the correct
template based on your needs into
the tray’s template slot.
3.
With the tray’s e
-
pill sticker at 6 o’clock, fill the tray counter
-clockwise.
The first dose goes into the compartment immediately to the right of the
tray’s
e-pill sticker.
4.
Fill compartments (up to 28 are available) with pills using the dosage
template as a guide.
5.
Place the tray into the dispenser so that the compartment with the
tray’s
e-pill sticker is
directly below the gray button labeled “B”
.
Important: Never force the tray to rotate.
6.
Close the lid.
7.
Turn the dispenser over and lock the dispenser.
Important:
The dispenser’s lock should only be turned a ¼ of a turn.
Overturning the key can cause the lock to break.
Congratulations
Your e-pill MedSmart Voice is now 100% setup.