12
ELECTRIC SCOOTER
REQUIRED TOOLS
1x8mm/10mm Spanner (included)
1x12mm Spanner (not included)
1x13mm Spanner (not included)
1x17mm Spanner (not included)
1x2,5mm 2x5mm Hexagon Wrench (included)
1x Philips Head Screwdriver (not included)
WARNING: ONLY USE GENUIN ZINC REPLACEMENT PARTS. The scooter has been built to certain Zinc design specifications. The original
equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket
products may or may not be compatible and will invalidate the warranty if used.
Always consult an authorised technician before maintaining your scooter.
WARNING: This scooter’s specification should not be modified. Altering the original components may or may not be compatible with the design
and will void the warranty.
ASSEMBLY
Required tools: two 5mm hex wrenches
1a.
Lift the frame front part and front wheel and align the curved steering tube with the hole on the deck frame. Insert the lock bolt and nut
into the hole. Tighten the lock bolt and nut with two 5mm hex wrenches.
Handlebar
Required tools: two 5mm hex wrenches, 8/10mm Spanner
1.
Rotate “a” to a straight position and put “b” into the suitable slot. Rotate clockwise and tighten “b”.
3
4
2
1a
1
