E.H. Wachs
Part No. 69-SERVO-MAN-01, Rev. A
1
MDSF Servo Electric
Drive
P
URPOSE
OF
T
HIS
D
OCUMENT
This document explains how to operate the E.H. Wachs
MDSF servo electric drive. It describes the equipment com
-
ponents and operating features, and includes a reference of
error codes and troubleshooting.
The servo electric drive can also be used to operate the EP
424 end prep machine, using an optional adapter (part no.
81-180-00).
Each page is designed with two columns. This large column
on the inside of the page contains instructions and illustra
-
tions. Use these instructions to perform the machining oper
-
ation.
The narrower column on the outside contains additional
information such as warnings, special notes, and defini
-
tions. Refer to it for safety notes and other information.
A WARNING alert with the
safety alert symbol indicates
a potentially hazardous situa
-
tion that
could
result in
seri
-
ous injury or death
.
WARNING
This is the
safety alert symbol
. It is used
to alert you to
potential personal injury
hazards
. Obey all safety messages that
follow this symbol to avoid possible
injury or death.
In This Document