MDSF Servo Electric Drive
10
Part No. 69-SERVO-MAN-01, Rev. A
E.H. Wachs
11.
Turn the speed dial clockwise to increase the speed to
the desired speed.
After releasing the trigger,
you will have to squeeze the
trigger and press
Start
again
to re-start the motor.
12.
As the machine operates, continue holding the trigger
and adjust the speed as necessary using the speed dial.
Release the trigger to stop the machine.
13.
If necessary, press the Emergency Stop button on the
pendant to immediately stop the machine and disable
power.
14.
Always press in the Emergency Stop button when
making adjustments to the cutting machine.
15.
Turn the main power switch on the cabinet OFF when
the operation is complete, or when connecting or dis
-
connecting any components.
Figure 1-9. Turn the main power off when finished or
when changing connections.
M
AINTENANCE
The servo electric drive does not require any lubrication.
Mechanical components are sealed and lubricated for life.
NOTE
