28
E-flite PT-19 ARF Assembly Manual
2. Cut four strips of card stock that are 3/8-inch
(9mm) wide and 4 inches (100mm) long.
3. Use low-tack tape to attach a piece of card stock
that will align with the front edge of the fuselage
and with the cowl mounting plates that are inside
the fuselage.
4. Place the cockpit hatch back into position on the
top of the fuselage.
5. Slide the cowling onto the front of the fuselage.
Make sure the pieces of card stock are positioned
on the outside of the cowl.
6. Slide the propeller adapter onto the motor shaft.
Use the adapter to help align the opening in the
front of the cowl centered with the adapter and
motor shaft.