E-FLITE Hurricane 25e TM Скачать руководство пользователя

Страница: 22 / 26

E-flite Hurricane 25e PNP/BNF Assembly Manual

INSPECTION OR SERVICES

If this Product needs to be inspected or serviced, please

use the Horizon Online Service Request submission

process found on our website or call Horizon to obtain

a Return Merchandise Authorization (RMA) number.

Pack the Product securely using a shipping carton.

Please note that original boxes may be included, but

are not designed to withstand the rigors of shipping

without additional protection. Ship via a carrier that

provides tracking and insurance for lost or damaged

parcels, as Horizon is not responsible for merchandise

until it arrives and is accepted at our facility. An

Online Service Request is available at http://www.

horizonhobby.com under the Support tab. If you

do not have internet access, please contact Horizon

Product Support to obtain a RMA number along with

instructions for submitting your product for service.

When calling Horizon, you will be asked to provide

your complete name, street address, email address

and phone number where you can be reached during

business hours. When sending product into Horizon,

please include your RMA number, a list of the included

items, and a brief summary of the problem. A copy

of your original sales receipt must be included for

warranty consideration. Be sure your name, address,

and RMA number are clearly written on the outside of

the shipping carton.

Notice: Do not ship LiPo batteries to Horizon. If you

have any issue with a LiPo battery, please contact

the appropriate Horizon Product Support office.

WARRANTY REQUIREMENTS

For Warranty consideration, you must include your

original sales receipt verifying the proof-of-purchase

date.

Provided warranty conditions have been met,

your Product will be serviced or replaced free of

charge. Service or replacement decisions are at the

sole discretion of Horizon.

NON-WARRANTY SERVICE

Should your service not be covered by warranty

service will be completed and payment will be

required without notification or estimate of the

expense unless the expense exceeds 50% of the

retail purchase cost.

By submitting the item for service

you are agreeing to payment of the service without

notification. Service estimates are available upon

request. You must include this request with your item

submitted for service. Non-warranty service estimates

will be billed a minimum of ½ hour of labor. In

addition you will be billed for return freight. Horizon

accepts money orders and cashiers checks, as well as

Visa, MasterCard, American Express, and Discover

cards. By submitting any item to Horizon for service,

you are agreeing to Horizon’s Terms and Conditions

found on our website http://www.horizonhobby.com/

Service/Request/.

UNITED STATES

(Electronics and engines)

Horizon Service Center

4105 Fieldstone Rd

Champaign, Illinois

61822 USA

[email protected]

877-504-0233

Online Repair Request visit:

www.horizonhobby.com/repairs

(All other products)

Horizon Product Support

4105 Fieldstone Rd

Champaign, Illinois

61822 USA

[email protected]

877-504-0233

UNITED KINGDOM

Horizon Hobby Limited

Units 1-4 Ployters Rd

Staple Tye

Harlow, Essex

CM18 7NS

United Kingdom

[email protected]

+44 (0) 1279 641 097

GERMANY

Horizon Technischer Service

Hamburger Str. 10

25335 Elmshorn

Germany

[email protected]

+49 4121 46199 66

FRANCE

Horizon Hobby SAS

14 Rue Gustave Eiffel

Zone d’Activité du Réveil Matin

91230 Montgeron

+33 (0) 1 60 47 44 70

Содержание Hurricane 25e TM



























Результаты поиска

Содержание Hurricane 25e TM

Отзывы:

Похожие инструкции для Hurricane 25e TM

Бренды по названию

Популярные бренды

E-FLITE Hurricane 25e TM, Инструкция по сборке

Результаты поиска

Содержание Hurricane 25e TM

Отзывы:

Похожие инструкции для Hurricane 25e TM

Бренды по названию

Популярные бренды