EN
Prefl ight
1
Remove and inspect contents.
2
Read this instruction manual thoroughly.
3
Charge the fl ight battery.
4
Fully assemble the airplane.
5
Install the fl ight battery in the aircraft (once it has been fully charged).
6
Check the Center of Gravity (CG).
7
Bind the aircraft to your transmitter.
8
Make sure linkages move freely.
9
Perform the Control Direction Test with the transmitter.
10 Perform the AS3X Control Direction Test with the aircraft.
11 Adjust fl ight controls and transmitter.
12 Perform a radio system Range Test.
13 Find a safe open area to fl y.
14 Plan fl ight for fl ying fi eld conditions.
Model Assembly
Required Adhesives:
Medium CA
Main Landing Gear Installation
1. Apply Medium CA (cyanoacrylate adhesive) to the tab end of the exhaust
pipe (
A
) and attach it to the main gear assembly as shown.
2. Install the main landing gear (
B
) to the bottom of the fuselage and secure
into place with 4 included screws.
When needed, disassemble in reverse order.
A
B
13mm (2)
4
