EN
Battery Selection
We recommend the E-fl ite
®
4400mAh 22.2V 6S 30C Li-Po battery
(EFLB44006S30). Refer to the Optional Parts List for other recommended
batteries. If using a battery other than those listed, the battery should be within
the range of capacity, dimensions and weight of the E-fl ite Li-Po battery packs
to fi t in the fuselage. Be sure the model balances at the recommended CG.
CAUTION:
Always keep hands away from the propeller. When armed, the
motor will turn the propeller in response to any throttle movement.
1. Lower the throttle and throttle trim to the lowest settings. Power on the
Transmitter, then wait 5 seconds.
2. It is recommended to apply hook and loop tape (
A
) to the bottom of your
battery.
3. Push down on the release button (
B
) and remove the battery hatch.
4. Install the fully charged battery (
C
) all the way forward in the battery com-
partment as shown.
See the Adjusting the Center of Gravity instructions for
more information.
5. Make sure the fl ight battery is secured using the hook and loop straps (
D
).
6. Connect the battery to the ESC (the ESC is now armed).
7. Keep the aircraft immobile and away from wind or the system will
not initialize.
• The ESC will sound a series of tones (refer to step 6 of the binding
instructions for more information).
• An LED will light on the receiver.
8. Reinstall the Battery hatch.
C
CAUTION:
Always
keep hands away from
the propeller. When
armed, the motor will turn
the propeller in response
to any throttle movement.
B
A
Battery Installation and ESC Arming
D
14
