6
EN
1. Turn over the model so the bottom of the
fuselage faces up.
2. Carefully install the micro connector of the
aileron servo (
A
) into the AIL port of the
receiver (
B
).
3. Insert the 2 wing pins (
C
) into the holes in the
front of the fuselage. Connect the back of the
wing to the fuselage.
NOTICE:
DO NOT crush or otherwise damage wiring
when installing the wing on the fuselage.
4. Turn the aircraft right side up. Carefully use the
o-ring tool (
D
) to pull the o-ring (
E
) over the
hook in the fuselage (
F
).
NOTICE:
Pulling too much on the O-ring can
damage the O-ring connector in the wing, requiring
replacement of the wing.
Tip:
Before fl ying, always ensure the O-ring is in
good condition. Replace a worn or infl exible O-ring.
5. Install the canopy on the fuselage.
Installing the Wing
ELE RUD
AUX 1
THR AILE
GEAR
NANOLITE RECEIVER 2048
2.4GHz DSM®
TECHNOL
OGY
BIND
A
A
B
C
D
E
F