background image

User Manual HTS801 

Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions  |  9

3.5" TFT colour display

Standard cable gland / connector

*)

Back section

Front section

USB service interface

Front section with electronics,

display

*)

 and probe cable

Back section with electrical connection,

additional module

*)

 and mounting holes

5 push-buttons for configuration menu

Probe connection / socket

*)

Standard cable glands / connectors

*)

Back section

Front section

*)

 Optional

*)

 Depending on electrical connection options

Fig. 2 

HTS801 connector-side view

Connection terminal block

RS485 add-on chip

Mounting plate

Space for optional modules

Back section

Front section

Fig. 3 

HTS801 modular polycarbonate enclosure inside view

3.3  Configuration Interface

The HTS801 is ready to use and does not require any configuration by the user. The factory setup of HTS801 

corresponds to the type number ordered. Please refer to the datasheet at 

www.epluse.com/hts801

. If needed, the 

user can change the factory setup with the 

▪.

Free PCS10 Product Configuration Software. 

Please refer to chapter 6.1 PCS10 Product Configuration Software.

▪.

Display and push-buttons (if the optional display is selected) 

Please refer to chapter 1.2.1. General Safety Instructions.

▪.

Modbus RTU protocol (if the RS485 option is selected). 

Please note that configuration is limited to the Modbus communication settings. 

Please refer to chapter 6.2 RS485 Digital Interface.

Содержание HTS801

































































Отзывы: