E+E Elektronik HTS801 Скачать руководство пользователя страница 32

Страница: 32 / 64

User Manual HTS801

Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions | 32

4.7.2.

Pressure-tight Installation

Mounting of sensing probe with screw connection (accessory)

A.1/2".ISO.or.a.1/2".NPT.screw.connection,.respectively,.is.available.as.an.accessory.for.mounting.both.sensing.

probes.(6.mm.(1/4").and.12.mm.(1/2")).

Order codes:

RH probe (12 mm (1/2"))

T probe (6 mm (1/4"))

1/2”.ISO

HA011102

HA011104

1/2”.NPT

HA011103

HA011105

For mounting instructions please refer to chapter 4.4.2. Pressure-tight Installation.

4.8

Remote Sensing Probes Type T28

The sensing probes type T28 are optimised for application in

meteorology. Their rotation symmetric design allows for mounting

in a modern ventilated radiation shields, as it is available with

HA010508 (please refer to chapter

8.Spare.Parts / Accessories

5 Electrical Connection

NOTICE

The electrical installation of the HTS801 shall be performed by qualified personnel only. Observe all

applicable national and international requirements for the installation of electrical devices as well as for

power supply according to EN 61140, class III (EU) and class 2 supply (North America).

WARNING

Incorrect installation, wiring or power supply may cause overheating and therefore personal injuries or

damage to property.
For correct cabling of the device, always observe the presented wiring diagram for the product version used.
The manufacturer cannot be held responsible for personal injuries or damage to property as a result of

incorrect handling, installation, wiring, power supply and maintenance of the device.

Содержание HTS801

































































Результаты поиска

Содержание HTS801

Отзывы:

Похожие инструкции для HTS801

Бренды по названию

Популярные бренды

E+E Elektronik HTS801, Руководство пользователя

Результаты поиска

Содержание HTS801

Отзывы:

Похожие инструкции для HTS801

Бренды по названию

Популярные бренды