QtCAM
See3CAM_CU51 User Manual
12-Nov-15
www.e-consystems.com
|
Subject to change without notice
Page 5 of 24
USB mode
Resolution
Frame rates [Y16
format ]
USB 3.0
640 x 480
1280 x 720
1920 x 1080
2592x1944
120
60
30
14
USB 2.0
640 x 480
1280x720
1920 x 1080
2592x1944
30
12
5
2
The See3CAM_CU51 has two major camera controls namely:
1.
Brightness
2.
Exposure
There are two operating modes for See3CAM_CU51 they are:
1.
Master Mode
2.
Trigger Mode
5 QtCAM Application Description
The QtCAM application is a simple interface for capturing and viewing video from the
devices supported by the Linux UVC driver. This tool also supports extension unit control
of e-con’s See3CAM USB 3.0 webcam products. The features provided in the application
are as follows:
1.
Enumerating and listing all USB video devices connected.
2.
Changing resolution and color space/compression for video stream (if different
resolutions are supported by the device)
3.
Currently configured values of preview which is being shown.
4.
User can capture still images and set the path where still images will be saved.
5.
Configure UVC Extension Control (if supported by device)
6.
Displaying the current frame rate per second.
All the above listed properties can be configured by attractive and easy to use Graphical
User Interface. The application is tested in Ubuntu [>=12.04 (LTS)] 32-bit and 64-bit
Linux Distributions.
e-con provides QtCAM application for the following Linux Distributions:
Ubuntu 12.04 (LTS) 32- and 64-bit
Ubuntu 14.04 (LTS) 32- and 64-bit
6 Pre-Requisites
This section describes the high level instructions to install the See3CAM_CU51 on a
PC.
