QtCAM
See3CAM_CU51 User Manual
12-Nov-15
www.e-consystems.com
|
Subject to change without notice
Page 7 of 24
7 Application Features
The features that are supported in the current version of QtCAM are briefly described
below:
1.
Enumeration and Selection of camera device
2.
Still capture
3.
Video recording
4.
Camera Settings
a) Image Quality Settings
b) Still Capture Settings
c) Video Capture Settings
5. Extension settings
7.1 Enumeration and Selection of camera device
Application will emulate usb video devices connected to the system. The device name is
displayed in the device connected combo box. User can select any one of the camera from
the combo box and the corresponding preview is displayed in the right hand side of the
side bar.
Note:
Preview will not be displayed for the device if the camera is busy. i.e., camera is
opened by another application like Skype etc. Also, if there are two instances of QtCAM
application and both have the same camera selected then there will be no preview
displayed in the second instance of the QtCAM application.
7.2 Still capture
Application by default will start in still capture mode, if the application is in video mode
click the camera icon to switch back to still capture mode, the user can capture the still
image by clicking capture image icon available side bar or by clicking the preview.
The image will be saved in the directory path, selected in the image location available
under the still capture settings menu. The file name for captured image file is “QtCAM-
YY_MM_dd:hh_mm_ss-x”, plus the image extension format selected. If the extension
format is “jpg”, the filename will be “QtCAM-YY_MM_dd:hh_mm_ss-x.jpg”.
[Where YY-Year, MM-Month, dd-day, hh- hour, mm-min, ss-x denotes image number
updated when multiple images are taken within a second].
