DYNISCO SC170 Manual
3
33
3
3
3
33
3
3
2.2
MECHANICAL INSTALLATION
2.2.1 Weather Proof Housing
Optional weather-proof and explosion-proof housings are available.
The XP-HDC2-L accommodates a signal conditioner when the display
option is not required. The XP-HDGC2-L, with its glass window,
may be used when the display option is desired. These housings have
appropriate mounting plates in the bottom to attach the SC170 in any
of four orientations 90
°
apart. In addition special captive 6-32
machine screws are installed on the signal conditioner to facilitate
installation and removal. These captive screws are installed only if the
signal conditioner and housing are ordered at the same time. Figure
2-1 indicates the dimensions of these housings.
2.2.2 Conduit Mounting
The weather-proof housing has two 1/2” female NPT conduit entries.
These can be used to mount the housing directly onto the 1/2” male
NPT ends of conduits. Alternatively, a 1/2” union coupling can be
placed between the weatherproof housing and the wiring from the
signal source.
Fig. 2-1 Optional Weather Proof Housing
