From lab to production,
providing a window into the process
-6-
www.dynisco.com
Rev: 1117
P/N: n/a
ECO: n/a
When planning machinery and using the PT, follow the safety and
accident prevention regulations that apply to your application,
e.g.:
● EN 60204, Electrical equipment in
machines.
● EN 292, Machine safety, general design
guidelines.
● DIN 57 100 Part 410, Protection against
electric shock.
Mounting and electrical connection of the PT must be done by specialists
with EMC training, following all applicable regulations, and in
pressureless, voltage-free condition with the machine switched off.
The machine must be secured against being switched back on!
Burn hazard!
The PT must be removed with the melt in molten condition. The PT can
be very hot when removed.
Wear protective gloves!
3. Technical Data
3.1 Ordering guide
3.2 Ordering example
3.3 Performance characteristics
3.3.1 Accuracy
3.3.2 Repeatability
3.3.3 Resolution
3.4 Mechanical configurations
3.5 Pressure side connection
