From lab to production,
providing a window into the process
-27-
www.dynisco.com
Rev: 1117
P/N: n/a
ECO: n/a
8.2 Thermocouple replacement TDT models
A defective thermocouple is easy to replace.
- Loosen the hexagon socket screw at the top end of the sensor stem.
- Remove the defective thermocouple from the probe stem.
When fitting the new thermocouple, the pressure transmitting
capillary must be located in the slot of the thermocouple.
- Insert the new thermocouple all the way into the probe stem.
- Tighten the hexagon socket screw at the top of the sensor stem to secure the
thermocouple.
Fig. 16: Thermocouple
