From lab to production,
providing a window into the process
-9-
www.dynisco.com
Rev: n/a
P/N: n/a
ECO: n/a
Data Recorder
Stop
Recording
Set Point Select
Select Local
Setpoint
1A/2A
Auto Manual Control Automatic
Select
Control mode
PID Control Output Enable PID
Control outputs
Engage Pre Tune
No Action
Engage Self Tune
No Action
Increment Control
No Action
Output
Decrement Control No Action
Output
Start Recording
Select Alternate Setpoint
Manual Control Mode
Disable PID Control Outputs
Engages tuning mode selected
Engages tuning mode selected
Increments control output
percentage (0-100% in 20secs)
Decrements control output
percentage (100-0% in 20secs)
Outputs
Caution:
Plastic pegs prevent fitting of older non-reinforced single relay modules –
Remove the peg to fit dual relays (all dual relay modules have reinforced isolation)
Single Relay
Type & Rating:
Single pole double throw (SPDT); 2A resistive at 120/240VAC.
Lifetime:
>500,000 operations at rated voltage/current.
Isolation:
Reinforced safety isolation from inputs and other outputs.
Dual Relay
Type & Rating:
Single pole single throw (SPST),2A resistive at 120/240VAC.
Dual relay modules have shared common.
Lifetime:
>200,000 operations at rated voltage/current.
Isolation:
Reinforced safety isolation from inputs and other outputs.
Linear DC
Ranges
0 to 5, 0 to 10, 1-5, 2 to 10V & 0 to 20, 4 to 20mA (selectable)
with 2% over/under-drive when used for control outputs.
Resolution:
15 3/4 bit (1 part in 52K)
Accuracy:
0 to 20mA, 4 to 20mA into 500 max, 0 to 10V, 2 to 10V, 0 to 5V into 500
min updated at about 65ms intervals. (130ms settling time)
Stability:
± 76ppm
Isolation:
Reinforced safety isolation from inputs and other outputs.
