From lab to production,
providing a window into the process
-2-
www.dynisco.com
Rev: n/a
P/N: n/a
ECO: n/a
The following symbols are used on the product labels:
1. Installation
CAUTION:
Installation should be only performed by technically
competent personnel. It is the responsibility of the installing engineer to
ensure that the configuration is safe. Local regulations regarding
electrical installation & safety must be observed - e.g. US National
Electrical Code (NEC) and/or Canadian Electrical Code. Impairment of
protection will occur if the product is used in a manner not specified by
the manufacturer.
Installing Option Modules
Caution, refer to installation manual
when connecting
General danger to life or limb
Alternating current
Equipment protected
throughout by double
insulation
Both direct and
alternating current
Second Input + Linear out Module
Option A Module
Option 1 Module
Option 2 Module
Option 3 Module
Option 3 Module
Universal Input + Linear out Board
Power Supply Band
