From lab to production,
providing a window into the process
-21-
www.dynisco.com
Rev: n/a
P/N: n/a
ECO: n/a
Configuration Menu:
Configuration Mode Unlocking
Enter correct code number to access Configuration Mode. Default
Value = 10
Configuration Options
Select required Configuration Menu Option from list. Press to
continue.
Refer to the Configuration Menu screens sequences opposite for information about the Configuration
Sub-Menus.
Automatic Tuning:
Auto Tune Unlocking
Enter correct code number to access Automatic Tuning Mode.
Default Value = 10
Run Pressure Pre-Tune
Select from Yes or No (Available only when in Manual Control Mode)
Run Pressure Self-Tune
Select from Yes or No (Available only when in Automatic
Control Mode)
Pressure Tune Status
Shows the user the Tune Status, Result Message, Delay value, time
constant and the Gain of the process.
USB Menu:
USB Mode Unlocking
Enter correct code number to access USB Menu. Default Value = 10
Read/Write To USB Device?
From: Read/Write Configuration File; Read/Write Profile File or Write
Recorder Log File.
Enter A File or Folder Name
Enter an 8-character folder name for logs, or a file name for configu
rations and profiles. An extension (bct for configurations, .pfl for
profiles) is added automatically .
Caution:
Existing files/folders with
the same name will be over-written.
Writing Configuration File
The file is being written.
Caution:
Do not disconnect USB device until
completed! Data loss or corruption may result.
Transfer Successful
Confirmation of successful data transfer. Press to continue
Select File
Select the Configuration file to transfer from the USB stick. Caution:
A configuration read overwrites all existing instrument settings.
Reading Configuration
File The file is being read.
Caution:
Do not remove the memory stick
whist this operation is in progress. Data loss or corruption may
result.
Transfer Successful
Confirmation of successful data transfer. Press to continue
Transfer Failure
For write failures, check the disk space on the USB stick. For read
failures, check the maximum number of profiles/segments is not
being exceeded.
Recorder Control:
Recorder Mode Unlocking
Enter correct code number to access Data Recorder Menu. – if Log
Trigger is Recorder Menu Start/Stop. Default Value = 10
Recording In Progress Warning
If recording in progress when Recorder Menu entered. - Access to
the Start/Stop or Abort screens only until the recording is stopped.
Start/Stop Data Recording
Manually Stop, or Start a new recording. – if Log Trigger is Recorder
Menu Start/Stop.
Abort Recording
Forces a recording to Stop, overriding the selected record trigger. – if
