Dyness PowerDepot H5, Руководство пользователя

Страница: 27 / 33

PowerDepot H5 series User Manual
22
a. Remove the four screws on the cover and open the cover.
b. Find the red DIP switch on the host module and confirm the status of the DIP switch.
c. Set the DIP switch to the original state (Mode5: i.e. ADD: 0000)
d. Re-install the cover with four screws which were removed in step a.
Note:
⚫
Confirm the positive and negative interface of battery output terminal and inverter
input terminal. The red power cable is for connection of the battery
’ s positive to
inveter ’ s positive, and the black power cable is for the connection of battery ’ s
negative to inveter ’ s negative.Before connection, it is necessary to confirm the
charge and discharge parameters of the inverter interface.
host
host