Dynapac DTR100, Руководство по эксплуатации

Страница: 97 / 124

4. Unscrew the drain plug and drain off fuel.
5. Provide a cleaning cloth for collecting escaping fuel.
6. Unscrew the screws (3) and take off the fuel valve (2) with
seal (1).
7. Pull out the screen filter (1).
8. Remove the fuel filter (2) and seal (3).
9. Replace the fuel filter.
10. Install fuel filter with a new seal.
11. Clean and insert screen filter.
12. Fasten the fuel valve with new seal.
13. Screw the drain plug back in. Ensure leak tightness.
14. Fill the fuel tank
Ä
Chapter 5.4 „Checking the fuel level; top-
ping up fuel“ on page 53 .
15. Close the cap.
16. After a short test run check fuel filter, fuel valve and fuel lines
for leaks.
17. Dispose of fuel and fuel filters in line with environmental reg-
ulations.
B-100-0030
Fig. 105
3
2
1
B-100-0031
Fig. 106
1
2
3
B-100-0029
Fig. 107
Maintenance – Annually
DTR100 97