Dynapac DTR100 Скачать руководство пользователя страница 20

Страница: 20 / 124

3.2 Definition of responsible persons

3.2.1 Operating company

The operating company is the natural or juridical person who uses

the machine or in who's name the machine is used.

The operating company must make sure that the machine is only

used for the purpose it is intended for and in strict compliance with

the safety regulations mentioned in these operating and mainte-

nance instructions.

The operating company must determine and assess the danger in

its company. It must then take appropriate action to ensure health

and safety at work for its employees and point out any remaining

dangers.

The operating company must determine whether there are special

operational hazards such as a toxic atmosphere or limiting soil

conditions. Such conditions require special, additional measures to

remove or reduce the hazard.

The operating company must make sure that all users read and

understand the information concerning safety.

The operating company is responsible for the planning and profes-

sional execution of regular safety inspections.

3.2.2 Expert / qualified person

An expert / qualified person is a person who, based on his/her pro-

fessional education and experience, has profound knowledge in

the field of construction equipment and the machine in question in

particular.

This person is acquainted with the applicable governmental indus-

trial safety regulations, accident prevention instructions, guidelines

and generally acknowledged technical rules and regulations

(standards, directives, technical rules of other member states of

the European Union or other contractual states concerning the

agreement about the European Economic Area) in as far as is nec-

essary to be able to judge the safe condition of this machine.

3.2.3 Driver / operator

This machine must only be operated by trained, instructed persons

entrusted by the operating company aged 18 or more.

Observe your local laws and regulations.

Rights, obligations and rules of conduct for driver or operator:

The driver or operator must:

be instructed about his rights and obligations,

wear protective equipment as appropriate for the application,

have read and understood the operating instructions,

Concerning your safety – Definition of responsible persons

DTR100

Содержание DTR100





























































































































Результаты поиска

Содержание DTR100

Отзывы:

Похожие инструкции для DTR100

Бренды по названию

Популярные бренды

Dynapac DTR100, Руководство по эксплуатации

Результаты поиска

Содержание DTR100

Отзывы:

Похожие инструкции для DTR100

Бренды по названию

Популярные бренды