Dynapac DTR100 Скачать руководство пользователя страница 27

Страница: 27 / 124

3.4.5 Safety regulations and environmental protection regulations for handling bat-

tery acid

WARNING!
Danger of cauterization with acid!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing, goggles).

–

Do not allow clothes, skin or eyes to come into

contact with acid.

–

Rinse off spilled battery acid immediately with

lots of water.

Rinse acid off clothes, skin or eyes immediately

with lots of clean water.

Immediately call for medical advice in case of cau-

terization.

WARNING!
Danger of injury caused by exploding gas mix-

ture!

–

Remove the plugs before starting to recharge

the battery.

–

Ensure adequate ventilation.

–

Smoking and open fire is prohibited!

–

Do not lay any tools or other metal objects on

the battery.

–

Do not wear jewellery (watch, bracelets, etc.)

when working on the battery.

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing, goggles).

ENVIRONMENT!
Battery acid is an environmentally hazardous

substance!

–

Dispose of battery and battery acid according

to regulations.

Fig. 7:

Concerning your safety – Handling fuels and lubricants

DTR100

Содержание DTR100





























































































































Результаты поиска

Содержание DTR100

Отзывы:

Похожие инструкции для DTR100

Бренды по названию

Популярные бренды

Dynapac DTR100, Руководство по эксплуатации

Результаты поиска

Содержание DTR100

Отзывы:

Похожие инструкции для DTR100

Бренды по названию

Популярные бренды