Dynapac CC1300C, Инструкция по эксплуатации

Страница: 74 / 128

Maintenance - Maintenance schedule
4812161201_F.pdf 2018-04-17
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease. Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
The manufacturer’s instructions found in the
engine manual also apply. The manufacturer’s instructions found in the
engine manual also apply.
Specific maintenance and checks on diesel
engines must be carried out by the engine
supplier’s certified personnel. Specific maintenance and checks on diesel
engines must be carried out by the engine
supplier’s certified personnel.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
Before starting up for the first time on that day Before starting up for the first time on that day
3 Clean the outside of the cooler package In dusty conditions when
necessary 3 Clean the outside of the cooler package In dusty conditions when
necessary
4 Check coolant level 4 Check coolant level
6 Check the engine oil level Refer to the engine manual 6 Check the engine oil level Refer to the engine manual
14 Check the hydraulic reservoir level 14 Check the hydraulic reservoir level
3 Check for free circulation of cooling air 3 Check for free circulation of cooling air
1 Fill the fuel tank 1 Fill the fuel tank
7 Fill the water tank 7 Fill the water tank
8 Check the sprinkler system/Drum 8 Check the sprinkler system/Drum
9 Check the scraper setting/Drum 9 Check the scraper setting/Drum
22 Check the spring loaded scrapers Optional 22 Check the spring loaded scrapers Optional
21 Check the sprinkler system - tires 21 Check the sprinkler system - tires
22 Check the scraper setting - tires 22 Check the scraper setting - tires
19 Test the brakes 19 Test the brakes
64