Dynamix DW IAD-162, Руководство пользователя

Страница: 84 / 102

Inter-Digits time : 3
BusyForward : OFF
Keypad DTMF type : In-band
End of Dial Digit : #
Caller ID Type : x
DTMF Caller ID Start Symbol : D
DTMF Caller ID End Symbol : C
RFC2833 Payload Type
: 96
FAX Payload Type : 101
Disconnect Supervision : OFF
Loop Current Drop Time(ms) : 500
usr/config$
Dynamix IAD -162 Gateway
5.3.12 [sip]
This command is to configure SIP related parameters.
usr/config$ sip
SIP stack information and configuration
Usage:
sip [-print] [-mode pxmode] [-outpx IPaddmress] [-transport type]
sip [-px address] [-px2 address] [-pxport number] [-outpxport number]
[-line1 number]
[-prefix prefixstring] [-expire t1] [-port udpPort] [-rtp rtpPort]
sip -print
-print Display SIP stack information and configuration.
-mode Configure as Peer-to-Peer mode:0/Proxy mode:1.
-px Primary Proxy server address. (IPv4 address or dns name)
-px2 Secondary Proxy server address. (IPv4 address or dns name)
-pxport Proxy server port. (the port of proxy)
-outpx OutBound Proxy server address. (IPv4 address or dns name)
-outpxport OutBound Proxy server port. (the port of OutBound proxy)
-prefix Specify prefix string, use it when UserID contains alphabets
(if UserID uses numerals, specify as null)
-line1 TEL1 Phone number.
-pbsearch Search phone book 0:off/1:on.
-expire The relative time after which the message expires(0 ~ (2^31-1))
-port SIP local UDP port number (5060~5070), Default: 5060
-rtp RTP port number (2326~65534), Default: 16384
- 79 -