Dynamix IAD -162 Gateway
usr/config$ reboot
Step 5.
When IAD successfully establish PPPoE connection, use command
[ifaddr -print] to see detail information.
For example:
IP mode : PPPoE
PPPoE adapter information
Status :
Ready
IP address
: 59.121.139.25
Destination :
59.121.128.254
LAN IP address
: 192.168.123.123
NAT enabled
: ON
DNS Server Obtained : Manual
DNS primary
: 168.95.192.1
DNS secondary
: 168.95.1.1
Subnet Mask
: 255.255.255.255
Authenticate :
PAP
Protocol
: TCP/IP
Device :
PPP/PPPoE
PPPoE user name
PPPoE password
: 123
PPPoE reboot
: Yes
PPPoE echo
: Enable
EMS IP Address
: 192.168.1.1
EMS User ID
: vwusr
EMS Password
: *****
EMS cycle time
: 0
usr/config$
2.1.4.3 Application mode-Proxy/Peer-to-Peer Mode
After setting IP address, user must assign IAD to work under Proxy mode or
Peer-to-Peer mode. If there is no Proxy, please set your IAD as Peer-to-Peer Mode.
- 19 -
