Dynamix IAD -162 Gateway
3.6 Hotline mode
The Hotline Mode is applied in limited two peers. User just picks up the phone set
and then hears ring back tone or dial tone depended on configurations of destination
device.
Step 1.
Specify gateway service type as Hotline service.
Step 2.
Create a Hotline table with [line] command.
usr/config$ sysconf –service 1
usr/config$ bureau –hotline 1 10.2.2.2 201
This example means that if user picks up phone set of FXS Line1, gateway will
automatically dial out IP address of [201].
Note:
If this gateway is under P2P mode, please set the phone book firstly.
The IP address of “bureau” command indicates the IP address of called party
in P2P mode, or the proxy server IP address in proxy mode.
Step 4.
After the configuration, [commit] and [reboot] the device.
usr/config$ commit
usr/config$ reboot
- 40 -
