Dynamix DC – 16 S/SA 16 ports SHDSL DSLAM modem/router
User Manual
You cannot telnet
into the Dynamix
DC-16S
Make sure that telnet session is not already operating.
The Dynamix DC-16S/SA will only accept one telnet
session at a time.
Ping the Dynamix DC-16S/SA from your computer. If you are
able to ping the Dynamix DC-16S/SA but are still unable
to telnet, contact the distributor. If you cannot ping the
Dynamix DC-16S/SA, check the IP address in the
Dynamix DC-16S/SA and your computer. Make sure that
both IP addresses are located in the same subnet.
If the above corrective actions don’t work, contact for
technical support.
Problems with Password
Describes how to solve the problem of forgetting password.
Table 7-5 Troubleshooting the password
Problems
Steps to Take
You forgot the
password
Restore the configuration file ”sf_user.cfg”. All
settings will
return to the configuration as “sf_user.cfg”, so any
configuration you have made in CLI will be lost.
If the above corrective actions don’t work, contact
for
technical support.
Pin Assignment
CID Pin Assignment
The CID port is configured as DCE. The connection for such link is given below:
Table A-1 SHDSL CID port pin assignment
Pin no.
Usage
1
2
3
-------
RD
TD