Dynamix DC – 16 S/SA 16 ports SHDSL DSLAM modem/router
User Manual
System Administration with CLI
Command Line Interface (CLI) is the primary user interface to administrate the
system. CLI can be accessed either from the CID port or telnet session. All CLI
commands are simple strings designed for the administrator to manage your
Dynamix DC-16S/SA easily.
Command Structure
CLI is three-level command structure used in the system. All commands have
the following general format:
IPDSLAM/SHDSL# <action> Identifier parameters
Action
Identify the specific function to be acted. For example, users
type “
show port 16
” to view information of SHDSL 16
th
port.
“
show
” is the <action>.
Identifier
Indicate the object of the specific function to be acted. For
example, users type “
show port 16
” to view information of
SHDSL 16
th
port. “
port
” is the <identifier>.
Parameter
Users need to enter the specific parameters for
“configuring”,” indicating”…etc. For example, users type
“
show port 16
” to view information of SHDSL 16
th
port.
“16”
is
the <parameters>. It indicates SHDSL 16
th
port.
Table 4-1 CLI Command - Action List
action
Description
show
This is used to view information by the identifier and
parameters
selected.
add
This is used to add configuration of objects according to the
identifier and parameters. Parameters are used for selecting
specific facility and arguments. For example, “16” is SHDSL
16
th
port.
config
This is used to set or modify existent configuration of objects
corresponding by the identifier and parameters. The user
must
use the action to set or modify any existent configuration.
But
some important configuration was restricted for config, such
as
the content of line profile “default” and alarm profile “default”.
