13
effected by the helmet deforming, which can cause it to incur
damage or be rendered unfit for use. However, this is not always
visible to the naked eye.
For this reason, the helmet must be replaced immediately fol-
lowing any significant impact in cases such as a climber fall or
as a result of rock or ice fall, even if the damage is not visible.
Extreme temperatures (below -20°C/-4°F and above
+35°C/95°F), cleaning materials, hydrocarbons and paint, sol-
vents, adhesives/glues or stickers can all alter the physical char-
acteristics of the helmet, and therefore may only be used with
instructions or permission provided by the manufacturer.
If there is the least doubt about the safety of the product, it is to
be replaced immediately.
D
LIFESPAN:
The helmet’s lifespan is very dependent on the follow-
ing factors: regularity of use, type of use, external influences, correct
maintenance and cleaning method.
DYNAFIT explicitly recommends replacing any safety equipment
(PSA/PPE equipment) after a maximum of 10 years from the date of
production, regardless of whether the product has been used regu-
larly or not. Extreme and very demanding usage can even lead to a
lifespan of less than one year.
If the helmet suffers any extreme shock loads such as those that arise
following a climber falling, or in cases of rock and ice fall, it must be
replaced immediately even if there are no visible signs of damage.
E
STORAGE TRANSPORT AND CARE:
Storage
You should store your helmet somewhere dry, cool and well ven-
tilated, away from direct sunlight. Avoid storing the helmet near
any heat sources, nor anywhere where it is exposed to direct or
persistent UV rays or extreme temperatures. Do not store your
helmet in your backpack. Ensure that your helmet never comes
into contact with aggressive chemicals such as battery acid, sol-
vents or salt.
Cleaning and maintenance
Heavy soiling on your helmet can be washed off with mild soap
but do not use any chemical cleaning products or solvents. Rinse
your helmet thoroughly after cleaning and dry it all over with a
towel. Do not carry out any repairs or modify your helmet your-
self. If you notice that the helmet is damaged, you should replace
it. Any incorrect action performed on your helmet or any changes
made to it can adversely affect the helmet’s protective capability.
If you have any questions regarding replacement parts for your
helmet, please contact your DYNAFIT specialist dealer.
Transport
Protect your helmet from any mechanical wear or damage, solar
radiation, chemicals or dirt. The best approach is to get a protec-
tive bag for your helmet and/or a special storage and transport
container. Your helmet is delivered in a robust box which can be
used for this purpose.
Manual_beast_helmet.indd 13
14.02.17 11:35
