dynabook dynaEdge DE200 Series, Руководство по обслуживанию

Страница: 28 / 248

1 Hardware Overview
1-14
[CONFIDENTIAL] dynaEdge DE200 Series Maintenance Manual (960-947)
1.7 Specifications for special software
In the case that a special software (dynaEdge Configuration Utility) is installed, operations of
each button and behavior of each LED will be added/changed.
The following shows the added/changed items.
Table 1-10 Additional behaviors (for special SW)
Item
Special key
combination
Key hold
duration
Scenario LED behavior
Available
state
Network
status
check
1. Left + Up
2. Left + Up +
Enter
Immediate
Network
connected
Blue Power LED off
once S0 + log ‐ in
status Network not
connected
Blue Power LED off
twice
Power
state
change
Right + Power Immediate S0 ‐ > S4 LED turned off S0
Down +
Power
Immediate S0 ‐ > S5 LED turned off S0
Finger
Print log in
check
N/A N/A
Log in success Blue Power LED on
S0
Log in error
Amber power LED
blink
PIN code
login
N/A N/A
During login
Up/Down/Right/
Left key becomes
Number key (ex.
2, 4, 6, 8)
N/A ‐
PIN code
preboot
Auth for
SDE
N/A N/A
During Preboot
Auth
Up/Down/Right/
Left key becomes
Number key (ex.
2, 4, 6, 8)
N/A ‐
Key repeat
for
Up/Down/
Right/Left
key
N/A N/A
Key repeat for
Up/Down/Right/
Left key
N/A ‐