dynabook dynaEdge DE200 Series, Руководство по обслуживанию

Страница: 135 / 248

4.1 Overview 4 Replacement Procedures
dynaEdge DE200 Series Maintenance Manual (960-947) [CONFIDENTIAL] 4-3
Safety Precautions
Please read the following safety instructions before disassembling the computer and always
follow the instructions while working on the computer.
DANGER: 1) Always use the genuine battery that is authorized by our company or
compatible with the unit. Since other BATTERY PACKs have different
specifications, they may be incompatible with the unit, and may burst or
explode.
Never heat or disassemble the BATTERY PACK, as that could cause
leakage of alkaline solution. Never throw the BATTERY PACK into a
fire, as that could cause the BATTERY PACK to explode.
2) The power supply and other components carry high voltages. If you
need to turn on the power of a partially disassembled computer to check
its operation, be very careful not to touch connectors or components, in
order to avoid the risk of electric shock.
Also, do not disassemble individual components in first-level
maintenance.
WARNING: 1) Turn off the power and disconnect the AC adaptor from the power
source, to avoid exposure to electric shock.
2) Batteries in the computer retain an electrical charge, so there is danger
of electrical shock even when the computer is disconnected from an AC
power source. Remove any metal jewelry or accessories such as
necklaces, bracelets or rings, in order to reduce the risk of electric
shock. Never work with wet or damp hands.
3) Be careful of edges and corners as these may cut.
CAUTION: 1) When you change a component, be sure the replacement component
meets the required specifications. Never use foreign parts, to avoid any
risk of damage to the computer.
2) To avoid any risk of short-circuit, fire or other internal damage, never
allow any metal objects such as screws or paper clips to fall into the
unit. Be sure to replace screws with the same size as those removed.
Make sure all screws are securely fastened. Loose screws can cause
short circuits, resulting in heat, smoke or fire.
3) Before lifting out an FRU or other component, make sure all cables to
the component have been disconnected, in order to reduce the risk of
accidental electric shock.
4) If you use AC power, be sure to use the cable that came with the
computer or one recommended by our company.
5) Make sure that all replacement components meet the specifications for
the computer and that all cables and connectors are securely fastened, in
order to avoid the risk of electric shock.
6) Some parts inside the computer, such as the CPU and cooling module,
become very hot during operation. Conduct repair work after they have
cooled. Be careful around the CPU and cooling module to avoid burns.