USE R GUI DE
|
BL UE WAVE
®
F X -1 2 5 0
11
Connections
The connection cable has two 15P plugs that connect the controller to the emitter.
Plugging the connection cable into the controller
: Roll the plug clockwise while inserting to plug the cable in. Roll the plug
counterclockwise while removing to unplug the cable (Figure 11).
Plugging the connection cable into the emitter
: Roll the plug clockwise while inserting to plug the cable in. Roll the plug
counterclockwise while removing to unplug the cable (Figure 12).
Figure 11.
Plug Connection Cable into Controller
Figure 12.
Plug Connection Cable into Emitter
Attention
: When plugging in the female and male connectors, observe the key and keyway of each connector. The key should
align with the keyway (Figure 13).
Figure 13.
Key (Left) and Keyway (Right)
