16
Dymax BlueWave® LED Flood System User Guide
Choosing an Operating Mode
NOTE:
Upon power-up, your BlueWave LED Flood System will default to its last configuration settings.
Figure 9. Mode Start-up Screens (Left to Right: Manual Mode, Timer Mode, PLC Mode)
NOTE:
If the BlueWave LED Flood System powers up in PLC Mode
,
you cannot change any settings via the front
panel controls until you press the PLC Access Switch on the back panel.
To Switch Between Manual and Timer Mode:
1.
From the main page, press the
button to open the Options Menu (Figure 10).
2.
Use the
and
buttons, so that
the “SELECT MODE” opti
on is flashing and press the
button to
open the Select Mode Menu (Figure 11).
3.
Using the
and
buttons, highlight the desired mode and press the
button.
4.
The mode has now been set and the screen should return to the main page.
Figure 10. Options Menu
Figure 11. Select Mode Menu
