13
Dymax BlueWave® LED Flood System User Guide
le système mécanique et électrique, obstruer totalement la lumière et protéger l'opérateur pour une
utilisation sécuritaire. L'installation finale ne doit pas bloquer les accès pour la ventilation. Pour utiliser en
toute sécurité le système 'BlueWave LED Flood', le système doit être installé et utilisé en suivant les
instructions offertes par Dymax. L'utilisation du système de toute autre façon peut diminuer sa protection.
Dymax n'est pas responsable des changements pouvant diminuer la protection du système de séchage.
Unpacking and Inspecting Your Shipment
When your
BlueWave LED Flood System
arrives, inspect any boxes for damage and notify the shipper of box
damage immediately.
Open each box and check for equipment damage. If parts are damaged, notify the shipper and submit a claim
for the damaged parts. Contact Dymax so that new parts can be shipped to you immediately.
Check that the parts included in your order match those listed below. If parts are missing, contact your local
Dymax representative or Dymax Customer Support to resolve the problem.
Parts Included in the
BlueWave LED Flood System
■
LED Flood Power Supply (1)
–
PN 41276
■
LED Flood Array (2)
–
VisiCure® (PN 41211)
, PrimeCure™
(PN 41210), or Red
iCure™
(PN 41212) model
■
Power Cord (3)
–
Dependent on model ordered. Available options listed below:
o
Standard North American Power Cord (PN 41274)
o
Type G Power Cord for Asia (PN 41275)
o
No Power Cord (
Note: For European customers, the appropriate power cord will be added
)
■
Foot Switch (4)
–
PN 5028
■
Safety Glasses (5)
–
PN 35285
■
Interconnect Cable (6)
–
PN 41228
–
Connects the power supply to the array
■
BlueWave LED Flood System
User Guide (7)
–
PN 41264
Figure 4.
BlueWave LED Flood System
Components
(2) LED Flood Array
(5) Safety Glasses
(1) LED Flood Power Supply
(3) Power Cord
(7)User Guide
(6) Interconnect Cable
(4) Foot Switch
