10
Dymax UVCS 2.0 Light-Curing Conveyor User Guide
Figure 6. RF Detector Assembly
Figure 7. RF Detector Connector Cord
9.
Connect the Irradiator Cable(s) to the Irradiators (Figure 8).
Figure 8. Irradiator Cable Connections
10.
Unpack the Power Supply(ies). A 220-Volt Power Cord is provided with each Power Supply (Figure 9).
The Power Supplies may be configured for either 50 or 60 HZ operation and for 208-, 220-, 230-, or
240-Volt operation. Changing between 50 and 60 HZ operation requires repositioning of two
Capacitor Jumpers in each Power Supply. The Power S
upply’s shipping box is labeled with the voltage
and frequency set at the factory. Detailed Power Supply setup instructions are provided in the Fusion
Lamp operator's manual.
Figure 9. Power Supplies (front)
